How to Burn an ISO Image File onto a CD Instructions

Introduction

The 640H software file on our website is in the form of an ISO Image file. This single
file contains all the files required to update your 640H. It is similar to a ZIP or RAR
compressed file except that an ISO image file is specifically for CD burning.
To create your 640H CD we recommend you use one of the following programs: “Nero”
or “ISO recorder” for PC’s, and “Disc Utility” or “Toast” for Mac’s. We will now show you
how to create a CD using the above software.

Nero 6 for PC’s

1. Start “Nero Express,” via your Windows Start Button and Programs.
2. When the “Nero Express” window has appeared, select the CD recorder you
would like to use. This is done via the drop down menu found at the top right
hand corner of the Nero window.
3. Now select the “Disc Image or Saved Project” button.
4. A new window will now appear asking you to locate the ISO file that you
would like to burn to CD. Locate the file, select it and press the “Open”
button.
5. In the window that now appears make sure the correct CD recorder is
selected and a blank CD is placed in the recorder. Select a writing speed for
the CD and leave the “Number of Copies” as 1.
6. Make sure the “Verify data on disc after burning” box is ticked. This makes
sure that the ISO image is burnt on to the CD successfully.
7. Now click the “Next” button.
8. The burning and data verification processes will now begin. Nero will
constantly show the current process it is carrying out.
9. If there are any pauses during the burning process, then please do not stop
the process as this is common. Only abort the process if the pause is more
than 5 minutes long.
10. If there are any errors during writing, Nero will display an error message. If
this occurs, make sure you have downloaded the full ISO file, and the CD is
blank. If the error reoccurs, there may be a fault with your CD recorder.
Consult professional help for more assistance.
11. The process is complete when the “Data verification completed successfully”
window appears.
12. Press OK, and then press “Next” in the next window.
13. This will then eject the CD.
Cambridge Audio November 2006
14. Take the CD out, let it cool down if it is hot, shut the CD tray and press the
“Exit” button in Nero.

Nero 7 for PC’s

1. Start “Nero Express,” by clicking on the “Start” button, select “Programs”, go to
“Nero 7” and select “Nero Express” via the “Data” folder.
2. When Nero 7 has loaded, select the “Image,Project,Copy” button on the left hand
side menu.
3. Select “Disc Image or Saved Project” on the right hand side menu that now
appears.
4. A new window will now appear asking you to locate the ISO file that you would
like to burn to CD. Locate the file, select it and press the “Open” button.
5. In the window that now appears make sure the correct CD recorder is selected
and a blank CD is placed in the recorder. Select a writing speed for the CD and
leave the “Number of Copies” as 1.
6. Make sure the “Verify data on disc after burning” box is ticked. This makes sure
that the ISO image is burnt on to the CD successfully.
7. Now click the “Next” button.
8. The burning and data verification processes will now begin. Nero will constantly
show the current process it is carrying out.
9. If there are any pauses during the burning process, then please do not stop the
process as this is common. Only abort the process if the pause is more than 5
minutes long.
10. If there are any errors during writing, Nero will display an error message. If this
occurs, make sure you have downloaded the full ISO file, and the CD is blank. If
the error reoccurs, there may be a fault with your CD recorder. Consult
professional help for more assistance.
11. The process is complete when the “Data verification completed successfully”
window appears.
12. Press OK, and then press “Next” in the next window.
13. This will then eject the CD.
14. Take the CD out, let it cool down if it is hot, shut the CD tray and press the “Exit”
button in Nero.
ISO Recorder for PC’s
This software can be found at:
http://isorecorder.alexfeinman.com/isorecorder.htm
Please make sure you download and install the correct version of “ISO recorder” for the
correct version of Operating System on your computer. When you have installed “ISO
recorder,” to burn a CD carry out the following:
1. Place a blank CD into the CD recorder you wish to use to burn the 640H
software on.
2. Locate the ISO file you wish to burn onto CD on your computer.
3. Right click the file and at the top of the menu there is a button called “Copy
image to CD.” Select this option and it will load the ISO recorder software.
Cambridge Audio November 2006
4. Under the “Recorder” section of the ISO recorder software, select the CD
recorder with the blank CD in via the drop down menu.
5. Press the “Next” button and the burning process will begin.
6. If there are any pauses during the burning process, then please do not stop
the process as this is common. Only abort the process if the pause is more
than 5 minutes long.
7. If there are any errors during writing, ISO recorder will display an error
message. If this occurs, make sure you have downloaded the full ISO file,
and the CD is blank. If the error reoccurs, there may be a fault with your CD
recorder. Consult professional help for more assistance.
8. When the process has finished, the CD will eject and the ISO recorder
software window will display “Operation has been completed. Click “Finish”
to exit “ISO Recorder.” Take the CD out of the tray, close the tray and click
the “Finish” button on the window. Let the CD cool down before use.
9. Close the software.
Disc Utility for Mac’s
Mac OS10 comes with a CD burning utility called “Disc Utility.” This software can also
be used to burn ISO image files. To burn an ISO file onto CD, please carry out the
following:
1. Load the “Disc Utility” software which can be found in the applications folder.
2. Drag the ISO file into the “Disc Image Window” which is located on the left
hand side of the window.
3. Select the ISO file so that it is highlighted.
4. Make sure a blank disc is inserted into your Mac CD burner.
5. Click on the “Burn” icon and then press OK.
6. If there are any pauses during the burning process, then please do not stop
the process as this is common. Only abort the process if the pause is more
than 5 minutes long.
7. If there are any errors during writing, Disc Utility will display an error
message. If this occurs, make sure you have downloaded the full ISO file,
and the CD is blank. If the error reoccurs, there may be a fault with your CD
recorder. Consult professional help for more assistance.
8. When the process is finished, click OK and take out the CD from the CD tray.
Let the CD cool down before use.
9. Close the CD tray.
10. Close the software.
Cambridge Audio November 2006
Toast for Mac’s
“Toast” is an alternative commercial software that can be used to burn ISO files to CD.
To burn an ISO to CD, please do the following:
1. Drag the ISO file over the Toast icon either on the dock or in the applications
folder.
2. This will then load up “Toast” automatically with the ISO selected ready to be
burnt.
3. Make sure a blank CD is in your CD burner.
4. Press the big red button located in the bottom right hand corner of the “Toast”
window to begin the CD burning process.
5. If there are any pauses during the burning process, then please do not stop
the process as this is common. Only abort the process if the pause is more
than 5 minutes long.
6. If there are any errors during writing, Disc Utility will display an error
message. If this occurs, make sure you have downloaded the full ISO file,
and the CD is blank. If the error reoccurs, there may be a fault with your CD
recorder. Consult professional help for more assistance.
7. When the process is complete, take the CD out of the tray and close the tray.
Let the CD cool down before use.
8. Close the software.
The burning process is now complete.